Post Time:Jun 04,2009Classify:Glass QuotationView:1253
NREL testing confirms the fuel economy benefits of Sungate EP(R) automotive glass
DETROIT, June 3 /PRNewswire/ -- The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) and Pittsburgh Glass Works LLC (PGW) recently concluded testing which shows that Sungate(R) EP automotive glass improves fuel efficiency and cabin comfort in plug-in hybrid electric vehicles (PHEVs).
Testing was conducted while using the vehicle's air conditioning system. The PHEV was cooler and used less fuel in a test that simulated PGW's Sungate EP glazing in the windshield and rear window location. The test utilized the Urban Dynamometer Driving Schedule (UDDS), also known as the "city test," as specified by the Environmental Protection Agency for city driving. The comparison was made to standard glass being used in most vehicles.
"Over repeated UDDS cycles, the Sungate EP glazing reduced the air conditioning power and resulted in an increase in fuel economy," said John Rugh, Senior Mechanical Engineer for NREL. "The adjusted, utility factor-weighted fuel economy increased from 36.8 to 42.9 mpg for the Sungate EP thermal load case, while the adjusted, UF-weighted electrical energy consumption was roughly equivalent."
The adjustment and utility factor take into account real world factors such as aggressive driving and miles driven between charging.
Mukesh Rustagi, PGW's Director of Strategic Product Management, stated that the Sungate EP infra-red reflective glazing has been designed to reject almost 97 percent of the sun's infra-red energy.
The lower heat load due to the Sungate EP glazing in the test vehicle resulted in a 15 degree F reduction in cabin air temperature at the end of the heat soak period. After running the vehicle for approximately 1.5 hours, with the air conditioner set on maximum, the cabin air temperature for the Sungate EP case was still 4.5 degrees cooler than base glass.
"The Sungate EP glazing provides fuel savings and a more comfortable cabin for the consumer," said Rustagi.
Rustagi said the market trend toward the use of more hybrid electric vehicles (HEV) and PHEVs drove PGW to test the impact of the Sungate EP glazing on fuel efficiency of these high-efficiency vehicles. The testing confirmed the benefits of the Sungate EP glazing heat load reduction technology on these higher efficiency vehicles, where the climate control system has a larger fuel economy impact.
Sungate EP windshield technology will help automakers meet the new proposed California Air Resources Board's Cool Car Standards, Rustagi said.
"Consumers are seeking technologies that improve their experience with their vehicles and help them save money and be environmentally responsible," Rustagi said. "In various market research studies, nearly three-fourths of respondents were interested in having advanced solar-reflective windshields on their next new vehicles, and the Sungate EP glazing from PGW helps automakers fulfill that consumer interest."
About Pittsburgh Glass Works
Pittsburgh Glass Works (PGW)
Automotive glass products are manufactured and fabricated in six North American plants located in Berea, Ky.; Creighton, Meadville and Tipton, Pa.; Crestline Ohio; Evansville, Ind. and a joint venture facility in Tepeji del Rio, Mexico. In addition seven satellite parts assembly plants are located throughout North America and Europe, and two LYNX Services claims management call centers in Ft. Myers, Fla. and Paducah, Ky. Combined, the businesses employ approximately 3,700 people.
About NREL
NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for DOE by The Alliance for Sustainable Energy, LLC.
Source: Pittsburgh Glass Works LLCAuthor: shangyi
PrevKelman Bottles to supply glass containers for Labatt Breweries of Canada
Saint-Gobain Names New Vice President of Development and RecruitmentNext