Home > News > Industry News > Putting on a Façade: Installation Differences Between Curtainwall and Window Wall Systems

Putting on a Façade: Installation Differences Between Curtainwall and Window Wall Systems

Post Time:Jan 16,2021Classify:Industry NewsView:1072

Window wall and curtainwall have structural differences that affect the applications for which they are suited. With these differences come several installation and design considerations that are important for glazing contractors to understand, especially upfront in the design-assist phase when they can steer system decisions.

Tubelite provided its T24650 series thermal storefront and its 400SS screw spline thermal curtainwall for the Navajo Tribal Utility Authority headquarters in Fort Defiance, N.M., which was designed by Dyron Murphy Architects. Photo: Patrick Coulie Architectural Photography, courtesy of Tubelite Inc.

Structural Definition

Different companies have different definitions of curtainwall and window wall (also known as ribbon windows). Spencer Culhane, senior building envelope specialist at Schüco USA of Newington, Conn., offers his company’s definitions: A curtainwall is any façade assembly that is suspended in front of the superstructure of the building and a window wall is any assembly that is load-bearing or deadloaded to each level of the structure.

“For curtainwall, think of a continuous wrapping applied to the skeleton of a building’s structure. It’s unbroken and continues along the rise and width of the whole building, uninterrupted by the structure … It hangs like a curtain,” he says. “… Window wall systems are very common in concrete slab construction. On the edge of the floor, you’re resting and erecting continuous windows horizontally, but they only span floor-to-floor with the slab dividing the system.”

Culhane points out that the system includes the framing, glass and operables. Façades with window wall systems may include slab edge covers, façade paneling or spandrel glass, but the structural part of the system is what matters.

Tom Mifflin, director of marketing for Tubelite of Walker, Mich., says the optimal and most economical system largely depends on where the project is located and who is available to install it.

Marty Trainor, senior vice president at Chicago-based Ventana, says his company uses four-sided structural glazing for both product categories, which makes their performances similar.

“For some, window wall [when compared to curtainwall] is inferior and less of a high performance product,” he explains. “That’s not the case [for us] and a few other companies on the market.”

Trainor adds that many people believe window wall is also a cheaper product, but that depends on the project. Curtainwall is good for projects with steel structures or high spans between floors while window wall is better for concrete structures and small spans, according to Trainor. This is why window wall often is used for hotel and residential projects while curtainwall is used in large office projects where an HVAC system needs to be hidden.

He points out that trying to use a window wall when there’s 14 feet between floors could result in a cost higher or equal to using curtainwall, which is already designed to accommodate that distance.

Earl Patrick, executive designer for Enclos of Eagan, Minn., says that if the two system types are designed correctly, there should be no difference in performance. He says it can be difficult to achieve the same air infiltration values with window wall as with curtainwall.

“Though you could make the argument that window wall doesn’t perform as well seismically,” he says, adding that curtainwall isn’t pinned between two slabs like window wall.

Mifflin offers a further explanation.

“Another important performance consideration is the inter-story movement, which is determined by loads from the building structure, occupants, walls, equipment, column foreshortening, creep, and thermal expansion and contraction. When inter-story movement requirements exceed +/- ¾ inch, window wall systems should be carefully reviewed, or curtainwall systems should be considered,” he says.

Installation Differences

Installation also plays an important role in the system selection process. Trainor says that at Ventana, there’s one major difference between curtainwall and window wall: curtainwall is installed outside of the slab and window wall is installed inside the slab. Culhane echoes Trainor’s statement, saying those are the predominate installation methods for each system.

“Curtainwall can have panels that start inside but are then swung into the exterior, craned into position and then hung,” says Culhane. “Curtainwall installation requires a hoist mechanism on the outside of the building to hang the panels on the exterior. Window wall systems don’t have the same requirement and are installed on the inside from each floor level, though a glazier may need to go to the exterior for slab edge covers.”

He explains that logistics and the structural condition of a building often drive the product decision. If cladding a tower or high-rise where there’s rigging access on the exterior, it can be faster to clad using a curtainwall system. If cladding a long, low-rise building with a long, horizontal orientation where a crane would have to be brought onsite for the purpose of setting a façade, it might be better to go with a window wall system.

Source: usgnnAuthor: shangyi

Hot News

返回顶部