Home > News > Industry News > Solar glass manufacturer f | solar GmbH extend series production of 2 mm thin solar glass with low iron-oxide content

Solar glass manufacturer f | solar GmbH extend series production of 2 mm thin solar glass with low iron-oxide content

Post Time:Nov 12,2013Classify:Industry NewsView:324

Specifically suited for Glass-Glass-PV-Modules of new design

Being the first solar glass manufacturer, f | solar GmbH files an application for the allgemeine bauaufsichtliche Zulassung ‘national technical approval’ (abZ) for 2 mm thick heat-strengthened glass with the Deutsches Institut für Bautechnik (DiBt) in Berlin

The company f | solar GmbH presents in this year at the „EU PVSEC 2013“ in Paris a solar float glass with a thickness of only 2 mm and a very low iron content. Initially made in series production, this glass is heat-strengthened and provided with extremely robust and homogenous antireflection coating. This product with the name f | solarfloat HT is optimally suited for long-life and low-weight Glass-Glass-PV-Modules of the latest generation.

 

The float glass technology ensures consistent high quality of thin glass:

 

The new solar glass is exclusively made on the basis of the float glass technology. This well-tried process ensures the maintenance of tight manufacturing tolerances and low defect density as decisive advantages for the following processes, such as tempering.

 

The high pre-stressing rate of glass is a decisive prerequisite for the strength of the Glass-Glass-PV-Laminate. Therefore, the ultra-modern continuous tempering furnace of f | solar ensures optimum results with regard to planeness and bending tensile strength. With its typical bending tensile strength of 120 N / mm² this heat-strengthened 2 mm solar glass even exceeds the standard requirements for 4 mm standard glass. Being the first solar glass manufacturer, f | solar GmbH filed its application for the allgemeine bauaufsichtliche Zulassung ‘national technical approval’ (abZ) for 2 mm thick heat-strengthened glass with the Deutsches Institut für Bautechnik (DiBt) in Berlin.

 

f | solarfloat HT is provided with extremely robust and homogenous mono-broadband antireflection coating under purest vacuum conditions so that some 94% of energy transmission (TePV) are ensured. Therefore, the glass is optimally suited for silicon solar cells with selective emitter technology.

 

You may get more information about solar glass of f | solar GmbH by visiting the joint exhibition of the Solar Valley Mitteldeutschland GmbH in Hall 1 booth B12.

Source: solar GmbHAuthor: shangyi

Hot News

返回顶部